MC100, Concrete Moisture Meter for cement and gypsum material

WOOD PRO 100, Wood Moisture Meter

SP10, Digital multimeter with solar power measurement function

LASER50, is a laser distance meter which can measure distance to a target up to 50m away with the accuracy of 1.5mm.

AM47, analog multimeter using Intelligent Protection of electrical hazard against your safety and your analog multimeter. Suitable for students and technicians.  

700S, is all in one scope meter for industrial maintenance and installation applications. Five functions integrated in one affordable instrument: oscilloscope, frequency counter, function generator, logic analyzer, and DMM. Display 160x160 pixels graphic LCD with four directions cursor.

Auto Select, is both intelligent & down to earth simple, sensing between ACV, DCV or Resistance presence. There's no room to make a mistake for wrong measurement. Just ON or OFF ...

90, our industrial line DMM, auto range function will make the work hassle free. A DMM that every field maintenance personnel should go without.

95, the most complete DMM of all, come with a bar graph display. A rubberised protection over the instrument's body will give the user a sense of confidence as it is heavy duty and slip-proof.

50, our best seller model with ALL YOU WANT funtion suitable for hobbyist, students, and home user.

PD10, auto range pocket size DMM, suitable for field technicians in general electrical testing & measuring. 

89, compact and easy to use autorange DMM. Economically, one of our best seller model.

600IV, true RMS Digita Multimeter

AC600, measures below 2A scale yet still maintaining the accuracy where most of the low cost clamp starts to deviate at this low ampere. Maximum current to 600A.

ADC600, similar with AC600, but can use to measure DC Ampere.

AC1000, clamp meter with DMM and temperature measurement function. Measures up to AC 1000A.

ADC1000, similar with AC1000 but can use to measures DC Ampere.

260W, can measure and display five paramaters of power of each pahse : Active Energy,Apparent Power, Power Factor, Reactive Power, Active Energy, and Total Power Value in three phase measurement mode respectively. Voltage, current and frequency also can be obtained.

250ER, is one of our special products. No auxiliary grounding bar required. You can make fas, efficient and simple testing and checking of total grounding system resistance. Also measure leakage & neutral current.

25ER, our conventional earth resistance tester. 

21D, test voltage various from 100VDC to 1000VDC, measures insulation resistance up to 2 GigaOhm with large LCD display.

2K5, test voltage in fixed at 2k5DC & measures up to 100GΩ with analog display indicates resistance value & digital display indicates voltage value. Its unique design is to protect inner circuit from wet air.

5KV, wide range measurement up to 5kV and 60GΩ

Dry Block, is mainly used to generate a known constant heat source to calibrate temperature sensors and thermocouples. It can also be used as afield calibrator due to its portability. Our best seller type is PULSAR.

TEMP40, is designed to calibrate & checking temperature controllers, recorder, process monitors, panel meters. It can measure and simulate eight types of thermocouple and two types of RTD sensor.

LOOP20, loop calibrator.

ALL300, multifunction process calibrator.

ISC2000, is a bench top high precision integrated testing and measurement instrument. This integrated system calibrator with 4000 counts, true RMS, and very accuracy for the DDM module. Ideally suited for calibrating handheld analog/digital multimeters or other electrical voltage/current panel meters.

20TC, is K type T/C thermometer with bead probe.

20T, is splash proof thermometer with penetration probe included. Ideal for food & beverages industry.

DC600, is a professional version of vibration meter and data collector. It provides precise vibration measurement for most rotating machinery.

VC70, is our portable vibration meter. Ideal tool for the novice user in support of machine maintenance and to promote machine condiion monitoring programs.
 

HT100, temperature and humidity meter with clock, large clear LCD with super sharp digits.

CT40, coating thickness on ferromagnetic substrates and non-conductive.

RPM68, is a laser light source tachometer for accurate measurement of rpm using a reflective maker on rotating object. It is housed in a protective rubber housing for harsh industrial measurement.

200MA, is special instrument measures as small as a few mA with resolution of 0.1mA. Therefore suitable for small leakage current both AC and DC also serves as a good tool for process engineer when measuring smal conditioning circuit, sensor output or analog ouput from a transmitter.

LEAF600C, is a very tight contact with the surface up to 600°C.

TEF200C, is a special teflon coated probe which suitable for corrosive acids and alkalies.

IM600C, is a small diameter and mineral insulated construction which gives fast response in air and liquid.

HIT1150C, is an inconel 600 sheath and MI construction which allows measurements in air and liquids up to 1150ºC.

AIR400C, is an air probe which perforated shield prevents radiation heating and highly sensitive.

TG120, Digital Thickness Gauge

DG250, Digital Depth Gauge

Non Contact Check Pen, is designed to detect hot and neutral conductors, presence of AC voltage, or a break in a wire. It will be an ideal tool for general checking for blown fuses, switches, circuit breakers, AC otlets etc.

SP20, is a special tool compliment to your clamp meter. It is used to split the two wires of your power line without actually splitting it in order to measure current.

SC1, is a hip strap easy soft pouch.

HDC, is a heavy duty transport and storage case which protecting the instruments or equipments from impact or vibration during transport and provides airtight, watertight, and humidity.